(02) 4020 1173
BB Bought Before
0
Your Cart (0)

Your Cart is empty

MENU
BB

Amacron Horse Walkers

Amacron Horse Walker Drawings
Amacron Equine · General arrangement

18 m Eight-Horse Walker

Plan, elevation, isometric, track sections and details. Change the size, roof and base below; every drawing and the parts schedule update.
Drawing no.
AE-HW-18-GA
Revision
C · 09/11/2026
Configuration
TrexLok · Track roof
Status
Indicative · not for construction
Size
Base
Roof
Walker 5.0 km/h

01 · Plan view

Scale NTS · dimensions in metres · Section A–A shown

02 · Isometric, running

Drag to turn the view · live arm rotation
Arms turn at the selected walking speed, measured on the centre line of the 2.5 m track. Paddles hang across the full track width so every horse walks in its own bay.

03 · Side elevation

Scale NTS · fence and roof heights per manufacturer's drawing

04 · Section A–A · track build-up

Scale 1:5 (thicknesses true) · TrexLok vs conventional
23 mm double-sided rubber Concrete TrexLok grid cell walls Crusher dust bedding Compacted road base Natural ground

05 · Detail B · roof post footing

Scale 1:20 · required with TrexLok + roof

06 · Detail C · fence panel

Scale 1:20 · galvanised frame, rubber squares, weld mesh
Each 2200 mm curved panel has a 1695 mm band of rubber squares in a galvanised frame, with weld mesh above and below. Panels bolt together with connectors and fix to the slab with M10×100 expansion bolts.

07 · Detail D · machine foundation, conduits and controls

Dimensions in mm · per manufacturer's install guide
Lay the three conduits before anything else, from the foundation corner to just outside the fence where the control box goes. The foundation must be dead level. Control box: L reverse, R forward, Auto changes direction every 10 minutes (the Direction button above cycles these; Auto flips every 10 seconds in the demo). Keep the energiser off while loading and unloading.

08 · Parts schedule

Item Part Description Qty Unit Notes
General notes
  1. Drawings are indicative and for quotation only. Final dimensions, footing design and set-out to be confirmed by Amacron Equine and the installer after site inspection.
  2. Walking track is 2.5 m wide. The walker size is the outside diameter of the track.
  3. All steelwork hot-dip galvanised. Drive: German NORD gear motor, single-phase 240 V, adjustable speed, forward, reverse and auto-reverse.
  4. Fence and roof heights, track geometry, purlin lengths, foundation and fixings are taken from the manufacturer's general arrangement for the 18 m walker and the walker, fence and roof installation guides. Main post 2 m on a drive unit of about 600 mm (unit height to confirm); arm height typical, shown for proportion. 12 m and 16 m are scaled from the 18 m.
  5. Concrete and TrexLok prices include ground preparation and installation. The customer may use their own concreter and remove those lines from the quote.
  6. TrexLok: base compacted and laser-levelled before the grid is laid (Trexco guidance). Rubber anchors into the 38 mm fill to be confirmed with Trexco.
  7. Quantities marked “nominal” are typical figures for estimating and are confirmed at order.
Scroll To Top

window closes in seconds

window closes in seconds